When something goes wrong with the plumbing in a Dallas home, the path forward is straightforward. Call, describe what is happening, and we scope the job on the phone before anyone is dispatched. You get a clear picture of what the repair involves and what it will cost before anything is scheduled. That is how every job starts, whether it is a slow drain, a water heater that stopped heating, or a pipe that has let go somewhere inside a wall.
Dallas is a town where a lot of the housing stock carries real age, and older homes bring older pipe. We handle the full range of plumbing work here, from routine fixture repairs and drain cleaning to sewer line service, repiping, and emergency calls when something cannot wait.
Call (980) 462-9795 and we will get the job scoped and on the schedule.
Getting your water flowing again is easier than you think, and it starts with knowing what the situation actually is. Below are the job types we handle regularly in Dallas, described by what prompts the call rather than by what we put on a work order.
A drain that takes longer to clear than it used to is easy to ignore until it stops moving altogether. We clear sink drains, tub and shower drains, floor drains, and main line clogs. When a standard snake will not reach the buildup, hydro jetting scours the pipe interior and flushes debris out completely. For a main line that is backing up at every fixture at once, we inspect and clear the line from the house out to the connection point, and address root intrusion when roots have worked their way in through older pipe joints.
Some leaks are obvious. Others show up as a soft patch in the floor, a ceiling stain that keeps coming back, or a water bill that climbed without explanation. We use pressure testing to locate the source before any repair work begins, including slab leak detection when the water is running beneath a concrete floor. The cause of a leak explained, not just the patch, is what keeps a repair from becoming the same call six months later.
No hot water is one of the more disruptive problems a household faces. We work on tank and tankless water heaters and diagnose the problem before recommending a replacement. A unit that is not heating may need a new element or thermostat rather than a full swap, and we check that first. When replacement is the right call, we handle removal and installation and confirm hot water is running before we leave.
A running toilet, a dripping faucet, or a fixture that will not seat properly are all jobs we take. We handle toilet repair and replacement, kitchen and bathroom faucet installation, shower and tub fixture repair, and garbage disposal installation and replacement. Outdoor faucets and hose bibs that have cracked or seized are common calls too, especially after a hard stretch of weather in the region.
A refrigerator with a water dispenser or an ice maker needs a supply line run to it, and that line can develop a slow leak at the connection without showing obvious signs until water has already reached the floor. We install new supply lines, replace lines that have failed, and make sure the connection is sound before the appliance goes back against the wall.
Both materials show up in older Dallas homes, and both cause the same kinds of problems over time. Galvanized steel corrodes from the inside out, narrowing the pipe interior until pressure drops and discolored water starts coming through. Polybutylene becomes brittle and develops cracks at fittings and joints. When either material is the source of recurring leaks or low pressure, replacing the affected section or the whole supply system is the more durable fix.
A pressure reducing valve that is failing can send pressure too high, stressing every fixture and fitting in the house, or too low, leaving faucets and showers running weak. Diagnosing a pressure problem starts with checking the regulator and the main shutoff before looking further. Replacement is a straightforward repair once the cause is confirmed.
We handle gas line work on the domestic side, including the lines that supply water heaters and other gas-fed appliances. A gas line that smells, a connection that has corroded, or a new appliance that needs a supply line run to it are all jobs we take. Code-compliant plumbing on every job applies here as it does to every other part of the work.
Choosing the right plumbing fix is easier than it sounds once the scope is clear. The price for any job is confirmed on the phone before anything is scheduled. What moves a quote is what the diagnosis turns up: a faucet swap that reveals a corroded shutoff valve underneath, a drain cleaning that shows a damaged section of pipe, a leak traced to a fitting that has pulled away from the line. We walk through what we found before any additional work is done, so nothing proceeds without your agreement.
A small drip is easier to deal with than the water damage it leads to. Calling early, before a minor problem becomes a larger one, keeps the repair smaller and the cost lower. Ask what the job covers when you call and you get a straight answer. That is the only way to get a real number for your specific situation.
Call (980) 462-9795 and we will walk through it.
From a single shutoff valve to a whole-home repipe, the water goes off first, and then we get to work. Routine repairs and installations can often be scheduled quickly, and short-notice calls are welcome when the calendar has room. For rental properties and commercial buildings that need to stay operational, we confirm the plan on the call so the work is done with as little disruption as possible.
When a problem will not keep, we take emergency calls every day from 7:30 AM to 11:00 PM. Burst pipes, major leaks, sewage backup, and a complete loss of hot water are the calls that go to the front of the line. Reach out and tell us what the drain is doing, or what the pipe is doing, and we will figure out the fastest path to getting it handled.
Your home deserves pipes that are sound and up to code, and sometimes the only way to get there is to replace the supply system rather than continue patching individual sections as they fail. Repiping is the right call when leaks keep appearing in different spots, when water pressure has dropped throughout the house without a single identifiable cause, or when the pipe material itself has reached the end of its useful life.
A whole-home repipe is staged to keep the disruption manageable. The water goes off in sections rather than all at once, and the work moves through the house systematically. Most of the daily routine stays intact. We map out the scope before anything starts, confirm the timeline and the cost on the call, and test the system fully before the job is closed out.
Gaston County's older housing stock means repiping comes up regularly in this area. Galvanized and polybutylene pipe are both common in homes of a certain age, and both reach a point where a full replacement is the more straightforward path. Fixtures and lines left working before we go is the standard on every repipe, not just smaller jobs.
Working on an older home in Dallas means working with materials and configurations that are no longer manufactured. Galvanized fittings that have corroded onto the threads, shutoff valves that have not moved in decades and will not close fully, and supply lines that do not match any current standard are all part of the job on properties of a certain age.
Plumbing permit and inspection work applies here too. Older homes that have had additions, partial updates, or previous repairs done without permits sometimes carry a mix of pipe types and connection methods that need to be brought up to code when new work is done. We handle that as part of the job rather than leaving it for a separate visit.
The practical side of this is that a repair on an older home sometimes takes longer than the same repair on a newer one, because getting to the problem requires working around what is already there. We account for that in the scope and explain it before the work starts.
Real experience. Local knowledge. Ready to plumb. When we arrive, the first step is confirming what was described on the call and taking a look at the actual situation. What a drain is doing, where a leak is showing up, and what the water pressure reads at the fixture are all things that get checked before any repair is proposed.
We walk through what we found and what it means before anything is agreed to. If the scope has changed from what was described on the call, we explain why and confirm the revised cost before continuing. Water pressure diagnostics, leak detection, and sewer line inspection all produce findings that get communicated clearly, not just acted on. The work is tested before we leave, and the property is left with fixtures and lines working correctly. For a fuller picture of the job, see our page listing every plumbing service.
We serve Dallas and the communities around it throughout Gaston County. That includes Springdale, Ranlo, Gastonia, High Shoals, and Lowell, along with other nearby addresses in the area. If you are not sure whether your address falls within our range, call and we will confirm it on the spot.
We cover Dallas and the communities around it, including Springdale, Ranlo, Gastonia, High Shoals, and Lowell, as well as other addresses throughout Gaston County. Coverage for your specific address is confirmed when you call.
A knocking or hammering sound in a pipe after work has been done can be a sign of air in the line, a pressure change, or a fitting that is reacting to flow differently than the previous configuration.
Call (980) 462-9795 and describe the sound and when it happens so we can assess whether it needs attention.
Homes of a certain age in Dallas and across Gaston County frequently have galvanized steel or polybutylene supply lines, both of which cause problems as they age. Galvanized pipe corrodes from the inside out and narrows over time. Polybutylene becomes brittle at fittings and joints. If your home was built before the mid-1990s and you are seeing recurring leaks or pressure that keeps dropping, the pipe material is worth a look.
We work around occupied properties regularly. When you call to schedule, let us know the situation and we will confirm what access is needed and how the visit will be handled so the tenant is not left without water any longer than necessary.
Call (980) 462-9795 and describe what is happening.
We scope the job, confirm what it covers, and give you the rate before anything is scheduled. Call us and we'll walk you through the repair. That is how every job goes, whether it is a drain cleaning in Dallas or a full repipe. Through Mount Holly Plumbing Company, the price is settled on the call, not after the work is done.
Browse our coverage list. Just as close, we take plumbing work in: Ranlo, Gastonia, Lowell, Stanley, Cramerton, Kings Mountain, Lincolnton.
We cover the full range of plumbing work in Dallas and Gaston County, from a single dripping faucet to a whole-home repipe. Every job starts with a scoped price on the phone before anything is scheduled. The table below lays out what each service covers, who it fits best, and what is worth knowing before you call.
| Service | What's Included | Best For | Worth Knowing |
|---|---|---|---|
| Drain Cleaning & Clog Removal |
| Homeowners with slow or backed-up drains | Recurring clogs in the same spot usually point to a line problem, not just a surface blockage. |
| Water Heater Repair & Replacement |
| Households or businesses with no hot water, leaks, or inconsistent heating | A failing water heater is often repairable. We check that first before recommending a full swap. |
| Leak Detection & Repair |
| Properties with rising water bills or unexplained damp spots | We locate the source before opening walls or floors so the repair is targeted, not exploratory. |
Call (980) 462-9795 and we will walk through your situation, give you a straight price, and get the work on the schedule.
(980) 462-9795