Hickory homeowners and commercial property managers call us for the full range of plumbing work, from a faucet that will not stop dripping to a sewer line that has backed up into the building. Some customers call once for a specific repair and that is that. Others have rental units, older homes that need ongoing attention, or commercial buildings where a plumbing problem means downtime, and they call us back whenever something comes up. Either way, the first call works the same: we scope the job on the phone, confirm the price before anything is scheduled, and get the work done to code. Real experience. Local knowledge. Ready to plumb.
We cover the full range of residential and commercial plumbing work in Hickory and across Catawba County. A small drip is easier to deal with than the water damage it leads to, and most plumbing problems are easier to fix early than after they have had time to develop into something larger.
Call (980) 462-9795 and we will get the job scoped and on the schedule.
Water pressure that is too high puts stress on supply lines, fixture connections, and appliance inlets in ways that are not obvious until something fails. A pressure reducing valve that has drifted out of range or failed entirely is a straightforward replacement, but leaving it too long shortens the life of everything downstream. We check the incoming pressure, confirm whether the regulator is the cause, and replace it if it is. The work is done to the standard Catawba County inspectors enforce.
Homes with basements or crawl spaces in the region see real water movement during heavy rain events, and a sump pump is what keeps that water from collecting and causing damage. Installation involves setting the pump at the lowest point of the space, running the discharge line to a safe exit away from the foundation, and testing the float switch under conditions that confirm it will activate when it needs to. A pump that runs constantly, fails to activate, or has lost its discharge path needs attention before the next heavy rain, not after. Give us a call and we will get the water back on.
A new appliance going in means supply lines, drain connections, and shutoff valves all need to be right before the first cycle runs. A washing machine connection that is not seated properly leaks slowly behind the unit until the floor underneath is damaged. A dishwasher drain that is not looped correctly can allow wastewater back into the machine. We handle new connections and reconnections after appliances are moved, and we check the shutoffs while we are there.
An outdoor faucet that drips at the spout or leaks at the wall connection wastes more water than it looks like it does. We repair and replace hose bibs, frost-free sillcocks, and the supply lines that feed them. For properties with irrigation connections tied into the supply line, we handle the plumbing side of that work: the connection, the shutoff, and the backflow preventer where one is required. Code-compliant plumbing on every job means those connections are done in a way that protects the supply.
A burst pipe is one of the faster-moving plumbing emergencies there is. The first step is getting the supply off, and the second is finding out how much of the line is involved. A single split in an otherwise sound pipe is a different repair from a section that has failed because the pipe material itself is past its service life. We assess the condition of the surrounding pipe before we close it up, so the repair holds rather than failing again a few months later.
Hickory has housing stock that spans a wide range of construction eras, and the older end of that range comes with plumbing that was installed under different standards, with materials that are no longer used, and with fittings that do not match anything sold today. Galvanized steel supply lines corrode from the inside out over time, narrowing the interior of the pipe until pressure drops and discolored water starts coming through. Copper that has been patched repeatedly with incompatible fittings develops weak points at every joint.
Working on older pipe requires knowing what is there before anything is taken apart. A fitting that looks reusable sometimes is not, and a supply line that is sound at the repair point may be corroded two feet further along. We check the condition of the surrounding pipe when we open a wall or access a line, and we explain what we find before any additional work is done. Whole-home repiping with PEX or copper is the right answer when individual repairs are no longer holding up, and we scope that work the same way: on the phone first, with a clear price before anything is scheduled.
Older properties also carry shutoff valves that have not been operated in years and will not close fully when they need to. A shutoff valve that seizes during a repair is a real problem. Replacing them before an emergency is a straightforward job, and it is one of the first things we check when we are already on site for something else.
The sewer line running from the house out to the municipal connection is the part of the system that most people do not think about until something goes wrong. A clog inside the house, at a single fixture or drain, is a different situation from a main line backup that slows every drain in the building at once. The distinction matters because the repair is different.
Root intrusion is one of the more common causes of main line problems in established neighborhoods with mature trees. Roots follow moisture into the joints of older clay or cast iron pipe, and once inside they expand and eventually block the line. The symptoms build gradually, and by the time a full backup happens the intrusion is usually well established. We clear root-damaged lines and inspect the condition of the pipe to determine whether clearing it is enough or whether a section needs to be repaired or replaced.
Where the line and the situation allow for trenchless sewer repair, we use it to avoid tearing up a yard unnecessarily. Trenchless methods work from access points at each end of the damaged section rather than excavating the full run. We confirm what is appropriate for the specific line before any work starts.
Plumbing problems that cannot wait for a convenient appointment slot come up for homeowners and commercial properties alike. A burst pipe with the supply off, a sewer backup in a building that has to stay open, a water heater that has failed and left a property without hot water, these are the calls we take as priority. Short-notice calls are welcome, and when you reach us we can tell you what the schedule allows.
For businesses and rental properties, we work around the constraints of the situation. A tenant who cannot leave the unit for extended periods, a commercial kitchen that needs to stay operational, a building with multiple units where only one is affected, these are not complications we need to be talked through. We confirm what access is needed on the call and plan the visit accordingly.
The call is answered by someone who knows the trade and can scope the job on the phone before anyone is dispatched. Fixtures and lines left working before we go is the standard on every call, urgent or routine. Call and we'll get your water back on. Each service is described in more depth on our plumbing service list.
The price for any plumbing job is confirmed on the call before anything is scheduled. That means you know what the work covers and what it will cost before anyone comes out. What can change a quote is what the job turns out to involve once the work is underway. A repair that opens a wall sometimes reveals a condition that needs to be addressed before the original fix can be made. We explain what we find and what it means before any additional work is done.
The things that most often affect a final price are the condition of the existing pipe or fixture, how much has to come apart to reach the fault, and whether the diagnosis on arrival matches what the call described. None of that is unusual, and none of it changes without a conversation first. Ask what the quote covers and you get a straight answer.
Call (980) 462-9795 to get a price for your specific job.
The cause of a leak explained, not just the patch, is how we approach work where the scope is not immediately clear.
We serve Hickory and the communities nearby, including Brookford, St. Stephens, Long View, Northlakes, and Mountain View. We cover residential and commercial properties across Catawba County, and if you are not sure whether your address falls within range, a quick call confirms it. Drains that run clear. Faucets that don't drip. Pipes that hold.
Water hardness varies across the region, and mineral scale from hard water builds up inside pipes, on fixture aerators, and inside water heater tanks over time. Scale inside a tank reduces efficiency and shortens the unit's service life. A water softener installed on the main supply line addresses the problem at the source and reduces wear on every fixture and appliance in the building. We handle installation and can explain what the work involves on the call.
A description of what you are seeing is usually enough to scope the job on the call. If there is something specific about the situation that is hard to describe, mentioning it when you call is the most direct path. We ask the questions we need to get the job scoped correctly.
We handle commercial plumbing repair and installation across Hickory and Catawba County, including drain cleaning, water heater replacement, fixture work, leak detection, and pipe repair for offices, multi-unit buildings, and retail spaces. The process is the same as residential: the job is scoped on the phone, the price is confirmed before scheduling, and the work is done to code before we leave.
Older homes in Hickory and across Catawba County frequently have galvanized steel supply lines, which corrode from the inside out over time. The interior of the pipe narrows gradually, reducing pressure and eventually producing discolored water. When galvanized pipe starts failing in one spot, the surrounding sections are usually in similar condition, and repiping with modern materials is often the more durable path than patching individual sections.
A drip that gets fixed promptly does not become a water damage claim next month.
Call (980) 462-9795 to get a quote, confirm availability, and get the job on the schedule.
We are available every day from 7:30 AM to 11:00 PM. When you call Mount Holly Plumbing Company, you reach someone directly. There are no forms to fill out and no waiting for a callback.
Browse our coverage list. Other towns where we take plumbing work: Lincolnton, Westport, Lake Norman of Iredell, Lowesville.
We cover the full range of plumbing work in Hickory and Catawba County, from a single dripping faucet to a whole-home repipe. Every job starts with a scoped price on the phone before anything is scheduled. The table below lays out what each service covers, who it fits best, and what is worth knowing before you call.
| Service | What's Included | Best For | Worth Knowing |
|---|---|---|---|
| Toilet Repair & Installation |
| Homeowners dealing with a toilet that runs, leaks, or will not flush correctly | A running toilet can waste a significant amount of water before it shows up on the bill. |
| Water Heater Repair & Replacement |
| Households or businesses with no hot water, leaks, or inconsistent heating | A failing water heater is often repairable. We check that first before recommending a full swap. |
| Faucet & Fixture Installation |
| Anyone replacing aging fixtures or dealing with a drip that will not stop | Scope is confirmed before anything is pulled apart. |
Call (980) 462-9795 and we will walk through your situation, give you a straight price, and get the work on the schedule.
(980) 462-9795